Goldfinger is great, very helpful and informative.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
959 VFO windup question...
- Thread starter Hawkeye351
- Start date
Works on a 2547 also. Just installed a VFO windup on this 2547 for a local friend of mine, works great, even with clarifier button engaged it still works and settles dead on frequency.
1000uf 25v 105° electrolytic capacitor.
Tie positive lead of cap to wiper (flapper, lol) pin of the xmit frequency adjustment.
Tie negative lead of cap to ground side of R197.
Keep wires to switch (if using a switch to turn on and off) as short as possible.
1000uf 25v 105° electrolytic capacitor.
Tie positive lead of cap to wiper (flapper, lol) pin of the xmit frequency adjustment.
Tie negative lead of cap to ground side of R197.
Keep wires to switch (if using a switch to turn on and off) as short as possible.
- No one is chatting at the moment.
-
-
@ Catalyst 122:Who do I contact for a name change. I put in for it over a year ago and it says still under review.
-
-
-
@ BJ radionut:
Coffee and Ham Radios
Come join the fun with the friendliest group of hams this side of The Zed! We cover topics on every aspect of Ham Radio and Ham Radio Accessories, as well as ham adjacent! Join Chuck KK6USY and TheSmokinApe, as we discuss and discuss all things Ham Radio!
www.youtube.com
