on a galaxy 99 the variable power on the front doesnt work..in front of radio on inside there is a 4 pin plug that the wires from the variable pot go to..all 4 of the wires are still connected but there are 2 wires directly in front of the 4pin plug that have been cut. can anyone tell me how to get the variable power to work again? Thanks.....
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
99v
- Thread starter 2112
- Start date
study these diagrams and schematics.
you should be able to figure it out once you find the right ones:
http://www.cbtricks.com/radios/galaxy/dx99v/index.htm
good luck,
LC
you should be able to figure it out once you find the right ones:
http://www.cbtricks.com/radios/galaxy/dx99v/index.htm
good luck,
LC
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.