99V2 channel board

[Kung Fu Panda]

Anyone know the part number for the transistor that goes in front pin three on the 99V2. See pictures below. It was burnt to a crisp. Thanks in advance.

 

[999]

OK, I couldn't find anything in the 99v2, but I think I might have a handle on what you need. That isn't the channel board, but the board with the mic jack and the VR's on the front of the radio.
I'm using the 93t as a guide and that transistor is on your mic line.
I think the highlighted part is what you are looking for.

 

[Kung Fu Panda]

OK, I couldn't find anything in the 99v2, but I think I might have a handle on what you need. That isn't the channel board, but the board with the mic jack and the VR's on the front of the radio.
I'm using the 93t as a guide and that transistor is on your mic line.
I think the highlighted part is what you are looking for.
View attachment 43853

I was thinking the same thing, thanks for the reply... I have looked for that part and cant find it. mouser and Digikey has them but on backorder of course..

 

[999]

I was thinking the same thing, thanks for the reply... I have looked for that part and cant find it. mouser and Digikey has them but on backorder of course..

This should be what you're looking for. What I don't know it the size of the transistor. There are 3 sizes listed and I picked one and found it at Mouser.
http://www.cbtricks.com/radios/galaxy/datasheets/transistors/pdf/dta124ee.pdf

https://www.mouser.com/ProductDetai...MCC/DTA124EUA-TP/?qs=SdqRYZZ9IxCIMp3bAQkD6Q==

 

[Kung Fu Panda]

https://www.ebay.com/itm/10PCS-DTA1...TA124-DTA124E-124E-DTA124EU-124E/193931342505 Found these also