Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Adjusting frequency

  • Thread starter Thread starter saint7ds
  • Start date Start date
S

saint7ds

Guest
Hello all

Recently got me a dragon fc-6 freq counter and checking out some radios. A few were off by a hair, like instead of channel 20 being 27.205 it was 27.247. How can I go about adjusting the frequency to put it more on track?



Also, I understand a probe can be connected to it. Is this something I can make myself or should I get digging around online for one? Any suggestions would be greatly appreciated.


</p>
 

Hello all

Recently got me a dragon fc-6 freq counter and checking out some radios. A few were off by a hair, like instead of channel 20 being 27.205 it was 27.247. How can I go about adjusting the frequency to put it more on track?



Also, I understand a probe can be connected to it. Is this something I can make myself or should I get digging around online for one? Any suggestions would be greatly appreciated.


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom