You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Thanks, Groundwire. That’s good info. I think my question is more along the line of, “What is considered a reasonable tolerance for one of these units?”. Assuming warm up and alignment of the other test equipment is spot on, 3k seems drastic. I’m also thinking in terms of its main use of tuning the rx of radios.

I do have a 10MHz reference and distribution amp for it.

Appreciate the help.

[QUOTE="Chris Lawrence, post: 810650, member: 61167"] Thanks, Groundwire. That’s good info. I think my question is more along the line of, “What is considered a reasonable tolerance for one of these units?”. Assuming warm up and alignment of the other test equipment is spot on, 3k seems drastic. I’m also thinking in terms of its main use of tuning the rx of radios. I do have a 10MHz reference and distribution amp for it. Appreciate the help. [/QUOTE]

Top Bottom