Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

alpha delta 4-b

K

KJ4BAE

Member
Aug 14, 2008
50
3
18
59
I got an alpha delta 4-b switch off of e-bay, when i switch to the number 4 position it shows a dead short. I took the back plate off and it looks good. Is it supposed to do this?
 

I got a alpha delta (delta-4) antenna switch and all 4 positions work good. the center postition is a arc plug. i use mine backward to run more radios to one antenna though. maybe some body run to much power through the one you got. i think there rated for 1500 or 2000 watts.
 
I fixed it. All i did was take the arc-plug out look at it put it back in and now it works as it should. Maybe the previous owner had the plug to tight.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom