• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Amateur Radio Operator Killed in Connecticut Explosion

ARRL

Well-Known Member
Nov 15, 2008
10,933
54
58
Chris Walters, N0HVK, of Florissant, Missouri, was killed in an explosion on Sunday, February 7. He was 48. Walters -- who was employed as a safety manager for an electrical subcontractor at the Kleen Energy Plant in Middletown, Connecticut -- was one of five men who were killed in the explosion; at least a dozen people were injured. The accident received national news coverage. According to officials, the plant was in the process of doing a “blow down” -- clearing the natural gas lines -- when the explosion occurred, but investigators are still determining the cause of the explosion. According to his wife Fran, Walters was unemployed in Missouri and had been in Connecticut for two months working a temporary job. While in Connecticut, Walters found time to enjoy Amateur Radio activities. He was a member of the Shore Point Amateur Radio Club (SPARC), volunteering for community events and fundraisers with the club; he was also part of SPARC’s first ARRL Field Day. Connecticut Governor M. Jodi Rell has requested that flags fly at half-staff on February 10 in honor and memory of the five men who perished in the explosion. -- Some information provided by WVIT and SPARC



More...
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.