• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Browning Adjustment Question

  • Thread starter Thread starter Spike440
  • Start date Start date
S

Spike440

Guest
Bud of mine has a Browning base that is 4kc's low on TX on all freqs. The RX is dead on.



He says it s an AM Mark 3.



Can the TX be adjusted back where it should be?



Thanks!

-Spike


CDX-440



</p>
 

Bud of mine has a Browning base that is 4kc's low on TX on all freqs. The RX is dead on.



He says it s an AM Mark 3.



Can the TX be adjusted back where it should be?



Thanks!

-Spike


CDX-440



</p>
 
You say it is off on all channels?? They have individual crystalls for each channel. I would make sure it is not just a couple chanels or may just need to clean your selector switch good with conatact cleaner and work the dial. give that a shot and let me know.

MIKE D
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.