You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

For my feedpoint, I used 1/2" PVC pipe.

I put a long notch through two opposite sides, then slid my twin-lead through that...I then split the twin lead outwards, and crimped/soldered on some lug connectors. I also crimped/soldered some lug connectors onto the dipole wire as well. I then predrilled two holes through both sides of the tube... I ran a 3/4" screw through the lugs one on top of each other, then through the holes.

My dipole has survived many storms.

[QUOTE="office888, post: 314202, member: 9958"] For my feedpoint, I used 1/2" PVC pipe. I put a long notch through two opposite sides, then slid my twin-lead through that...I then split the twin lead outwards, and crimped/soldered on some lug connectors. I also crimped/soldered some lug connectors onto the dipole wire as well. I then predrilled two holes through both sides of the tube... I ran a 3/4" screw through the lugs one on top of each other, then through the holes. My dipole has survived many storms. [/QUOTE]

Top Bottom