Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Can anyone help me with wiring of a noise toy

R

radioman24

Active Member
Jul 19, 2009
449
34
38
Hi, i have this E.E.S. noise toy it is either a single ping or a single/double/switchable ping not to sure but i know it is a ping when i bought it so here are the color of wires i have to work with:

yellow
2 purple wire's
orange
green
white

any help would be great i am lost here,lol

Thanks,Dan
 

Hey R24, Good luck with this bro. Stating a bunch of colored wires doesn't really tell a piddler or an electronic technician anything. A tech would have to know what the wires goes to on the toy circuit.

If no help here, tote it to a local CB shop for hookup. There must be one near you somewhere. Most truck stops have a CB shop with a tech there or nearby. You must have an interstate highway within driving distance to you.

Keep cool and have fun with radios!
 
I have no cb shops in my area at all, also i posted the wire colors hoping someone has this same noise toy and can help me figure out witch wire goes where:)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom