• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Card in from Rwanda

DXman

Yes, that's 3100 degrees F. Nine yrs of hard work.
Apr 5, 2005
1,777
1,373
173
78
West Coast - Washington
It took a long time - but worth it.

CSC_0007.JPG


227 div. inside.JPG
 

Nice cards and great contact!
Things must move a bit slower over there, took over a year to receive a card from the first station I worked in South Africa on 10m. I'd given up on it.

7 3
 
Nice cards and great contact!
Things must move a bit slower over there, took over a year to receive a card from the first station I worked in South Africa on 10m. I'd given up on it.

7 3
Most exotic DX have a QSL manager to look after all that. They send them their logs a few times a year and the manager does the work in his free time.
 
  • Like
Reactions: Shadetree Mechanic
Most exotic DX have a QSL manager to look after all that. They send them their logs a few times a year and the manager does the work in his free time.
The South African gentleman in this case handles his own QSL, hence the delay. According to him and several other South African stations I've worked, their postal system has become nearly all but nonexistent.
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.