You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

The 47 ohm resistor should go from base to PCB ground on the final. The capacitor you mention that goes from collector to ground, should go from PCB ground to chassis ground. 1N4148 diodes are fine to use for the bulletin #1210, just make sure to observe polarity per the bulletin and you're good.

Let us know how you get on.

~Cheers~

[QUOTE="ExitThirteen, post: 584978, member: 6878"] The 47 ohm resistor should go from base to PCB ground on the final. The capacitor you mention that goes from collector to ground, should go from PCB ground to chassis ground. 1N4148 diodes are fine to use for the bulletin #1210, just make sure to observe polarity per the bulletin and you're good. Let us know how you get on. :) ~Cheers~ [/QUOTE]

Top Bottom