You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

There's alot of pieces part's between the clarifier circuit, D37 and TP1 to turn over the turnup truck.
One thing i see as well is the IC1 VCO-Mixer list in the sam's book is a UH1C007 and what's in it is a UH1C070,
I just pulled C-66 that is a 10 VDC cap to dig out more sony bond i missed around that area and the around IC1, I've swapped out the different number's of IC1 and never seen a difference coming off CT3.
Another thing i did was to attach a 10Pf cap where C132 would go with no difference in the CT3 setting
I will be putting in a 1000Uf 35VDC cap back in C-66 when i get the sony bond all cleaned out.

[QUOTE="slingslingbinks, post: 849799, member: 65981"] [B]There's alot of pieces part's between the clarifier circuit, D37 and TP1 to turn over the turnup truck. One thing i see as well is the IC1 VCO-Mixer list in the sam's book is a UH1C007 and what's in it is a UH1C070, I just pulled C-66 that is a 10 VDC cap to dig out more sony bond i missed around that area and the around IC1, I've swapped out the different number's of IC1 and never seen a difference coming off CT3. Another thing i did was to attach a 10Pf cap where C132 would go with no difference in the CT3 setting I will be putting in a 1000Uf 35VDC cap back in C-66 when i get the sony bond all cleaned out.[/B] [/QUOTE]

Top Bottom