cobra 19gtl limiter question

[Uncle Ronnie 336]

is it c51, c48, or both for the release delay cap?

coming soon: a 19gtl hotrod mosfet thread

 

[NZ8N]

I'd try a 1k or up to 2.2k in parallel to see how fast it releases.

 

[Uncle Ronnie 336]

what I did was put a 47k ohm in the r37 spot, and 10uf on c51. i also replaced the 5.6k at r31 with a 3.3k to increase the mic gain. so we're up from 10w PEP to a nice clean 18-19 from a 5wdk on a stock final. so i think that's what im gonna go with on this weekend project. i havent even fine-tuned the predriver, driver, or final yet

 

[Uncle Ronnie 336]

eventually this thread will be canned and I will make a master 19gtl hotrodding checklist thread with a mosfet.