• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 29 Swing Mod

Taylornic

Member
Mar 19, 2008
1
0
11
Was wondering what the cap and resistor mod does to the cleanliness output of the radio?
Nothing clipped and nothing stretched, turned or spread, just add the mod.
What would the output signal look like?

Thanks,
Taylor
 

the resistor would determine your DK , the radio should or could swing around 20 or so , but that would depend on how you were reading the swing and with what method.

If your not going to run a amplifier with this ? A simple tune on the radio would be good to go. Those are baiscally used when amplifiers are involved. Your output signal would not look text book , but it will still get the job done.

Sometimes beauty is in the eyes and ears of others.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.