New guy here. I have a Cobra 29 NW LTD Classic and the lite for the meter on the left side of the face has gone out. How do I replace it?
Thanx
Thanx
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Cobra lite out
- Thread starter Breeze800
- Start date
Two ways of doing it.
The first is just to replace the stock bulb with another one that you can get from any number of CB shops online for a buck or two. Minimal soldering skills are required. Just pay attention to the details of how it is wired and the receptacle that holds the bulb. More mechanically difficult than electrically difficult to do. . .
The other way is to replace it with a white LED and a resistor. You can get them on eBay this way. They even sell LED's that change colors. They cost about three bucks and are kinda trick looking if you are into that sort of thing.
http://www.youtube.com/watch?v=3BBuvc5Gi8E
The first is just to replace the stock bulb with another one that you can get from any number of CB shops online for a buck or two. Minimal soldering skills are required. Just pay attention to the details of how it is wired and the receptacle that holds the bulb. More mechanically difficult than electrically difficult to do. . .
The other way is to replace it with a white LED and a resistor. You can get them on eBay this way. They even sell LED's that change colors. They cost about three bucks and are kinda trick looking if you are into that sort of thing.
http://www.youtube.com/watch?v=3BBuvc5Gi8E
Last edited: