-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Custom Made???
- Thread starter psycho
- Start date
RatsoW8
Supporting Member, W9WDX ARC Member - WD8T
I think like the custom ground wire sticking out of the front panel...but I can't really remember.
I had a regular amp when I did custom trucking, had I had that amp things would have been very different.
RatsoW8
Supporting Member, W9WDX ARC Member - WD8T
Custom loads to exotic places, hash dens, belly dancers and espionage...
I'm buying that amp!!!
As sharp as you are....you should know custom truckers need custom amps.
It looks like the old no brand amps that H&Y used to sell as Boomer or Palomar elite 250`s and 400`s.
They had 2 1466`s in the 250 and 4 1466`s in the 400.
vertical transformers, class c, no negative feedback, cheap by the case lot.
They were ok amps if you hook the bias back up and add negative feedback to them..... custom built, not at all.
( here is what the 400 model Sch looks like, all the parts are there for ab bias, but it was grounded out because the amp was too unstable if it was hooked up)
http://www.cbtricks.com/Amp/palomar_other/400/palomar_400_sch.pdf
73
Jeff
They had 2 1466`s in the 250 and 4 1466`s in the 400.
vertical transformers, class c, no negative feedback, cheap by the case lot.
They were ok amps if you hook the bias back up and add negative feedback to them..... custom built, not at all.
( here is what the 400 model Sch looks like, all the parts are there for ab bias, but it was grounded out because the amp was too unstable if it was hooked up)
http://www.cbtricks.com/Amp/palomar_other/400/palomar_400_sch.pdf
73
Jeff