Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Danita Mark 5 Cept/UK FM Help

  • Thread starter Thread starter poohma
  • Start date Start date
P

poohma

Guest
Hello anyone using a Danita MK5 ? I have one that was bought new in 1991 that was Converted by PAMA Manchester for the UK FM band. It has a Eprom in line with the Channel change the only connections to it are the coloured ribbon from the CH change & the PLL Ic. (LC7137) I'm trying to get it back onto the Cept frequencys (Mid Band). I removed the LC7137 & replaced it with a LC7132 which would have been its original Ic for Cept band & removed the Eprom board & connected the coloured wires back as they should be but all it did was TX/RX on 27.185 & even though the CH change would change from 1 To 40 it stayed on 27.185. Anyone any ideas how to get it back as it should be ?
Please E-mail poohma@ntlworld.com
:!:
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom