• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Diamond CR320A Review

Se7en

Well-Known Member
Jun 27, 2010
4,573
223
73
Ca
Here's my take on the Tri band 2m/220/440 Diamond CR320A (so239) mobile antenna.

So far it is a pretty good antenna. seems pretty solid except where it can be folded up seems to have a bit of warble to it but that is expected. i did some test runs @ 85 MPH with good results on 2m 220 and 440 on the freeway. i am QRP on 220 but was able to make it okay on a few 30Mi + repeaters. tho 2m isnt that great but 220 and 440 is where it really shows its true gain. 2m gain is about what was expected about the same as a 1/4 antenna.


Now here is some close up photos of the Diamond CR320A.

ANLI dual compared to Diamond tri (anli 23", diamond 38").
Captured_image.png


Diamond folded over
2012-03-08_15-43-27_824-1.jpg


center coils
2012-03-08_15-41-03_474-1.jpg


front to back: Diamond CR320A, 440 phantom, 800-1200mhz phantom.
2012-03-08_15-57-29_960.jpg
 

Update: i decided to remove every screw on the antenna to find every piece powder coated, so i got out my wire brush and removed the paint on each part that was screwed together. make sure if you buy one that you check that.... it helped i guess the paint created a insulator on the mid and upper sections of the antenna.. good thing i only do the minimum amount of power needed.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.