Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Dielectric grease?

  • Thread starter Thread starter Tumbleweed
  • Start date Start date
T

Tumbleweed

Guest
I've not noticed if it was posted before, but is putting this on the center conductor a good idea or bad, or no real effect.

I was just thinking maybe a little prevention for corrosion.

I usually put self seal shrink tubing on the connector.


Jerry

CDX-350

2AK3350

RL39</p>
 

Andrews Wire and Cable Co. warns against getting any of it on the center connector.I tend to go along with that idea.


FT-857_web.jpg
Garth 9VE01 PE993 CDX993 Learn from others mistakes.You can not live long enough to make them all yourself.</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom