• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

dummy load

  • Thread starter Thread starter blooddog
  • Start date Start date
B

blooddog

Guest
hi all need help i need to make a dummy load to peak radio's and check amps up to 1000 watts can you tell me how i can make one "thanks blooddog"


</p>
 

hi all need help i need to make a dummy load to peak radio's and check amps up to 1000 watts can you tell me how i can make one "thanks blooddog"


</p>
 
I agree with the bird. They are built to last!!!! Expensive, but you will never have to replace it. I use the Bird Termaline 8251. It is rated for 1kw, but can handle much more I'm sure!!



Bird---------Get a Bird.


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=triplej@worldwidecbradioclub>Triple J</A> at: 10/22/04 10:55 am
 
I agree with the bird. They are built to last!!!! Expensive, but you will never have to replace it. I use the Bird Termaline 8251. It is rated for 1kw, but can handle much more I'm sure!!



Bird---------Get a Bird.


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=triplej@worldwidecbradioclub>Triple J</A> at: 10/22/04 10:55 am
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.