Hello guys my channel display went on my dx2547 any ideas where can i get a replacement or help to trouble shoot thanks.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Dx2547 channel display
- Thread starter kaos513
- Start date
IIRC, this radio is a base radio version of the 959, so many of the parts should be interchangeable.
RF Parts should have it.
Think I would unplug ad re-plug the wire header to the ch LED board - to start off with, and make sure that it isn't just a bad connection..
RF Parts should have it.
Think I would unplug ad re-plug the wire header to the ch LED board - to start off with, and make sure that it isn't just a bad connection..
Last edited:
I unpluged the main harness from channel selector then replugged it in it did work for awhile but seems that was it forthe display, hopfully nothing shorted out on front panel.
I ordered some displays they should be here in 1 week, hopefully they will work after install, will report back when I'm done if they work I will ask a mod for permission to post info on the supplier if anyone has same issue.thanks.