dynascan aka cobra

[darkrfoverlord]

any one know the wiring code for this mic? someone gave it to me . would like to try it on my madison. it's a ca-72 compression mike. tnx. 73 qrt qsb okay how about the pin out for the 5 pin madison, you would think that i would at least know that.


</p>Edited by: <A HREF=http://pub86.ezboard.com/udarkrfoverlord.showPublicProfile?language=EN>darkrfoverlord</A> at: 12/4/01 6:17:32 am

 

[Hook948]

Hello darkrfoverload, Look in the cb radio section,page2,4th article down. "seek help with turner jm+2" this will work on all radios and mic.s (at least it has worked for me<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/laugh.gif ALT=":lol"> ) Hope this helps.

<img src=http://www.chargerscastle.com/cbclub/hook948.gif>

Yaesu-Dancing around the World! 948 Central Texas, 2DK43, PE948 - Hook948@hotmail.com</p>

 

[darkrfoverlord]

thanks for the reply, i found out from the guy that gave it to me that the wires were a little different than normal red audio? well i put my +3b back on and i'm happy now. 73


</p>

 

[Flatland Radio]

The wiring for the Ca-72 is 1 Audio=Red 2 Ground=Sheild 3Receive=Blue 4Common=Black 5Transmit=White.The Ca-72 is a compression desk mike for SSB cbs. If you change C-1 and C-2 to .01 ufd it will make the sound sharp instead of bassy and if you jump r-11 it will increase the output level.



Dont know if anyone cares anymore just thought I would put it out there for reference purposes.


</p>

 

[darkrfoverlord]

hey thanks some of us out here appreciate info like that. 73


CDX-251 2SF251 </p>