Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

emperor 5010 de-tune

K

kb9ikh

Member
Aug 26, 2010
10
0
11
hi..
i have a emperor 5010 that i need to de-tune on sideband..assuming the radio is unmolested, other than the frequency mod. by using vr 103 ssb power, will i be able to bring the ssb power output down below 20 watts pep? preferably below 18 watts? my plan was to use a small 2 pill amp..bout 100 watts or so. so i need a lower input drive

john
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom