• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Flex 3000 for sale

kennwtaylor

New Member
Oct 28, 2013
1
0
1
75
Hello all,
The last buyer did not work out, so I have a ready to ship, 1 month old Flex-3000 for sale. If you have ever used the Flex SDR, then you are well aware of the capabilities of this fine radio. If you are looking for the Flex-3000 then you are about to be impressed!

Purchased by me NEW from Flex-Radio as a spare to my Flex-5000a, it has seen less than 1 hour of total use and is LIKE NEW in every way! Newest firmware (v1.2.5.6) is installed and all self tests performed and passed. Comes with everything as new and also includes the Griffin Power-mate Knob, HEIL AD-1 modular to 8 pin foster connector for all your HEIL microphones, a W2IHY interface cable for the Flex radios and I will also include a SIIG (with TI chipset) PCI fire-wire card, which is a recommended card by Flex-Radio to ensure proper operation - for free!

$1300 shipped to your door.
Please respond via email as I do not check here often enough - kennwtaylor@hotmail.com

73.
 

Attachments

  • 20130604_1.jpg
    20130604_1.jpg
    98.6 KB · Views: 7
  • 20130604_1342.jpg
    20130604_1342.jpg
    572.6 KB · Views: 5
  • 20130604_134.jpg
    20130604_134.jpg
    178.3 KB · Views: 5

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.