Four pine wire harness, five pin plug

[LeapFrog]

I have an SRA-158-4H, a four pin plug came on the microphone.
It needs to be wired 5 pin to work on a Grant XL/148, can I get by with the 4 wire pig tail?

I'm thinking I don't need to change out the pig tail as a 4-to-5 pin adapter will work, but I'm not sure.
I don't need the pin-out or wire color code, I will figure it out, I just need to understand if a fifth wire needs to be "in circuit" for the conversion to happen.
Thank you!
73

 

[ExitThirteen]

Negative, jump pins 2 and 4 together on the 5 pin plug and a 4 wire cord will work just fine. Don't need 5 wires.


~Cheers~

 

[LeapFrog]

Negative, jump pins 2 and 4 together on the 5 pin plug and a 4 wire cord will work just fine. Don't need 5 wires.


~Cheers~

Thank you ExitThirteen, I appreciate your help good sir.

 

[ExitThirteen]

Anytime!


~Cheers~