You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Ok, So LOW RF power on AM is set for 2.5 to 4 Watt setting and you're not getting there from the current Driver and Final Install...

Did you or someone you know, install MOSFET before?

This radio may have been a BIPOLAR board (set up and parts support for it)...
[ATTACH=full]45587[/ATTACH]
This Graphic shows MOSFET parts and DIODES installed
- but DRIVER and FINAL Numbers are SANDED off

So you have to choose your poison - the more we know what has been done to the radio - the better off we ALL are for being there to help you get thru this.

[QUOTE="Handy Andy, post: 766977, member: 52309"] Ok, So LOW RF power on AM is set for 2.5 to 4 Watt setting and you're not getting there from the current Driver and Final Install... Did you or someone you know, install MOSFET before? This radio may have been a BIPOLAR board (set up and parts support for it)... [CENTER][ATTACH=full]45587[/ATTACH] This Graphic shows MOSFET parts and DIODES installed - but DRIVER and FINAL Numbers are SANDED off[/CENTER] So you have to choose your poison - the more we know what has been done to the radio - the better off we ALL are for being there to help you get thru this. [/QUOTE]

Top Bottom