You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
if it smoked when you first turned on the power...or got very hot.....look for a dead short. The only thing that will make that transistor get hot when the radio is not keyed is if current is going through it.
make sure the tab is insuled...make sure the insulator is on the screw that holds the tab to heatsink.
if the final is heating up the problem has to be in that area.
You should always monitor the current draw of th radio when your doing work on it. After replacing any parts and powering up...you should watch the current draw... if you see the radio drawing lots of current...you have a bad short and you should power down immediatly.
The average radio will draw under .5 amps in rx mode.....if the radio draws more there is something getting hot.
Check that mounting tab on the transistor and make sure its insulated.
There has t be a short to ground if its heating up without keying the radio.
Please advise me to what is a good replacement mic for my SR-497HPC... Answer: 497 is "wired like Cobra", so many choices available. That radio does not need a power mic, so purchase a stock "coffin style" mic with a decent cord, like the ones that Astatic uses. The Superstar DM-507 is my go-to. https://www.ebay.com/itm/3050474478...adANq91JSiEEnz8EGqPJRBloTgEyaVsBoCtoMQAvD_BwE $12.99 + .99 cent shipping.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.