Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help IDing jumpers on old style 2950

R

romakdaddy

Member
Jul 2, 2009
51
2
18
55
theres 3 sets of jumpers,none labled.which is which? cbtricks board layout dosnt label them either.if someone has a pic pointing out the jumper IDs(j1,j2 ect) id be gratefull,all i found searching was the procedure with no diagrams.
 

left is j1 middle j2, right is j3.

j1 is the expanded frequency, j2 allows you to select between frequency and ch display, and j3 turns the rb switch into emergency channel 9
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom