• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Hmmm...not sure of the problem you're running in to but I've had no issue programming either of the 2 models I have (version 1 and version 2).


I can program 10 and 11 meters on one bank (A) and have the next bank (B) be only 11 meter and then have (c) be just 10 meter etc.


It definitely should work without a problem.


I think you need to try a couple of different things first.


1 # Can you write just 11 meter frequencies to the radio?

2 # Can you write just 10 meter frequencies to the radio?


Also there is a manual way to expand the radio by powering in while holding in buttons on the face. I think it might solve your problem if you do that expansion first and THEN try to connect to the computer and read from the radio and then write back to the radio.


I am having trouble remembering but I think you hold in func / scan/ emg together while powering on and then select Band B and then hold in the func key for a couple of seconds and then the screeen while show something else and you turn it off. Then when you turn it on again you should have the export frequencies.


I also read from the radio first and then go in and modify...that could be something else to try.