well after a couple of days of putting stuff back on the radio that was cut, I can't get vr-12 to adjust
r-131-cut replace tr-26 cut replace tr-24 cut replace check vr 12 trimmer on ohm meter it adjusts fine out of the circuit
the diode next to vr12 checks good not shorted what am i missing or overlooking to get it to work again thanks
r-131-cut replace tr-26 cut replace tr-24 cut replace check vr 12 trimmer on ohm meter it adjusts fine out of the circuit
the diode next to vr12 checks good not shorted what am i missing or overlooking to get it to work again thanks
