home brew power mic

[skipshooter205]

i have built a desk power mic with the turner as the shell i built the amp from the schematic off the m6b with a few changes and the element from the same works great and have had great audio reports im now working on the third one with custum colors you cant beat the contacts in the old turners.......<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin">


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=skipshooter205>skipshooter205</A> at: 8/2/04 6:28 pm

 

[skipshooter205]

i have built a desk power mic with the turner as the shell i built the amp from the schematic off the m6b with a few changes and the element from the same works great and have had great audio reports im now working on the third one with custum colors you cant beat the contacts in the old turners.......<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat"> <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin">


</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=skipshooter205>skipshooter205</A> at: 8/2/04 6:28 pm

 

[bob85]

good job skipshooter, i have built many homebrew mics and speech processors over the years and still use one i built the amplifier in today, its good to see somebody else likes doing the same thing, keep it up.

 

[JRComm]

Some one homebrewing this antenna?
I'll buy it if is less than a new one, Just to try it!
I had one of the saliut LW-150 and on a move that
I did from Cali to Texas it got stolen wile I was settlling
In Texas. Sad