Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

homemade high pass filter for tvi

  • Thread starter Thread starter clemriley
  • Start date Start date
C

clemriley

Guest
has anyone heard of this....read somewhere a guy said to get a 3prong plug and cord .use ground wire only .plug into wall and other end inline with antenna cable hooked behind set .sposed to work....also read agood idea is to carefully cut plastic off of coax about 1/2 long right at grond level at base of tower and wrap copper wire around shield of coax and then as short as possible grond wire to your groundrod.water proof and your done....


</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=clemriley>clemriley</A> at: 9/13/03 10:23 am
 

has anyone heard of this....read somewhere a guy said to get a 3prong plug and cord .use ground wire only .plug into wall and other end inline with antenna cable hooked behind set .sposed to work....also read agood idea is to carefully cut plastic off of coax about 1/2 long right at grond level at base of tower and wrap copper wire around shield of coax and then as short as possible grond wire to your groundrod.water proof and your done....


</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=clemriley>clemriley</A> at: 9/13/03 10:23 am
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.


      You do not have the permission to use the chat.


      Top Bottom