How to align a radio without RF generator

[sme89saulito]

If i dont have a rf generator how i can re-align a cb radio?? , other question how to connect a cb radio output to the input of other cb radio maybe through a voltage divisor or rf attenuator or how??, or it could damage both radios??



Thanks




</p>

 

[sme89saulito]

If i dont have a rf generator how i can re-align a cb radio?? , other question how to connect a cb radio output to the input of other cb radio maybe through a voltage divisor or rf attenuator or how??, or it could damage both radios??



Thanks




</p>

 

[KD5VHF]

<blockquote>Quote:<hr>how to connect a cb radio output to the input of other cb radio maybe through a voltage divisor or rf attenuator or how??, <hr></blockquote> If you just want to monitor, TX into a dummy load and on the RX radio just short a PL-259 and screw it on the back of the RX radio.Use headphones on the RX radio to keep from feed back. Just remember not to TX with the RX radio and the "plug" on it.<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT="">


<hr />73, Mike KD5VHF@ARRL.net</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=kd5vhf>KD5VHF</A> at: 3/10/04 10:19 pm

 

[KD5VHF]

<blockquote>Quote:<hr>how to connect a cb radio output to the input of other cb radio maybe through a voltage divisor or rf attenuator or how??, <hr></blockquote> If you just want to monitor, TX into a dummy load and on the RX radio just short a PL-259 and screw it on the back of the RX radio.Use headphones on the RX radio to keep from feed back. Just remember not to TX with the RX radio and the "plug" on it.<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/wink.gif ALT="">


<hr />73, Mike KD5VHF@ARRL.net</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=kd5vhf>KD5VHF</A> at: 3/10/04 10:19 pm