• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

How to disable talk back Stryker 655hpc

Truck

Member
Dec 18, 2012
84
14
18
KY
Love these new radios but the talkback will not shut off completely it will only turn down and that causes problems with squeal when using a power Mic
 

Been working with Shawn at Stryker. Here is the fix. Worked great of course the final touch up would include heat shrink
NSGJ0jQ.jpeg
 
The talkback control is on the top just to the right of the name Stryker, it's the "mon" control.. Here is what Stryker says about their talkback control. Should be pretty simple.

  • Variable Talk Back ControlThe infamous talk back squeal is virtually eliminated with our independently controlled talk back circuitry. The Stryker CB radio operator can adjust the volume to the perfect level as operating conditions require. Best of all the user no longer has to turn down the microphone gain to stop the annoying squeal that is often the result of poor design or cost cutting at the production level.
  • 2 Mon: The variable Mon control (talk back) is used to monitor your ownvoice.This can be used to compare different microphones. To increasethe volume of the talk back rotate the control clockwise. To decreaserotate counterclockwise. To turn off the talk back rotate the controlcompletely counterclockwise.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.