Can anyone tell me how to wire a Turner +2 to a Colt Excalibur SSB? I can't find it in the Turner wiring guide. The wire colors are red black white and shield. Any help would be much appreciated... Thanks, Dan
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
How to wire a Turner +2 to a Colt Excalibur SSB Base Station
- Thread starter danmcclain
- Start date
Pulling from here: http://www.iw5edi.com/ham-radio/5882/mic-wiring-diagrams
And here: http://hammadeparts.jivetones.com/A...ner Wiring Diagrams (Var. microphones) WW.pdf
Looks like it should be:
white (audio) -> pin 1
Shield (ground) -> pin 2
Red (receive) -> pin 3
Black (transmit) -> pin 4
From the Turner guide it looks like you'll have to figure out whether or not you need to move wires between contacts on the PTT switch. Unless the mic has a switch for going between electronic and relay switching already built in. I can see from eBay pics that there is a switch on the bottom of the mic, but I can't tell if that's for switching between keying types or for disconnecting the battery power.
All standard disclaimers apply, since I don't actually own either of these.
And here: http://hammadeparts.jivetones.com/A...ner Wiring Diagrams (Var. microphones) WW.pdf
Looks like it should be:
white (audio) -> pin 1
Shield (ground) -> pin 2
Red (receive) -> pin 3
Black (transmit) -> pin 4
From the Turner guide it looks like you'll have to figure out whether or not you need to move wires between contacts on the PTT switch. Unless the mic has a switch for going between electronic and relay switching already built in. I can see from eBay pics that there is a switch on the bottom of the mic, but I can't tell if that's for switching between keying types or for disconnecting the battery power.
All standard disclaimers apply, since I don't actually own either of these.