You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I set the Ground description to Poor and generated the Poor Earth version, and here is a screen shot of the patterns overlaid.

[ATTACH=full]18965[/ATTACH]
I was thinking about changing the radiator length by 2", the error I noticed earlier and did see an increase in gain, but I'm not sure right now if I did that for this new model over Poor Earth I posted here. However, I did raise the radiator and as I expected the gain for the model did get closer to your results, but still short of your 4.72.

DB, am I correct with my antenna at 32' feet is your model much higher? I did not consider that.

Here is my wires data:
[ATTACH=full]18966[/ATTACH]

[QUOTE="Marconi, post: 564719, member: 903"] I set the Ground description to Poor and generated the Poor Earth version, and here is a screen shot of the patterns overlaid. [ATTACH=full]18965[/ATTACH] I was thinking about changing the radiator length by 2", the error I noticed earlier and did see an increase in gain, but I'm not sure right now if I did that for this new model over Poor Earth I posted here. However, I did raise the radiator and as I expected the gain for the model did get closer to your results, but still short of your 4.72. [B][I]DB, am I correct with my antenna at 32' feet is your model much higher? [/I][/B]I did not consider that. Here is my wires data: [ATTACH=full]18966[/ATTACH] [/QUOTE]

Top Bottom