• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

ICOM IC-706MKIIG AM RECEIVE MODIFICATION

Happy_Hamer

Administrator
Staff member
Mar 22, 2001
5,064
216
123
With a little research, I created a nice PDF of this modification for the ICOM IC-706MKIIG using the ICOM FL-102 AM FILTER

The modifications are not verified or tested by WorldwideDX.com. Modifications are of your own risk.

Performing modifications of some equipment may be a violation of local laws. If you have any doubts, do not perform the modification.
 

Attachments


Thanks for the pdf

I did this mod several years back and it does make a major difference
in AM reception. I was doing a lot of shortwave listening and it was
like having a new radio.
I lost the direction for the mod so it was nice downloading the pdf.

What I don't remember is what the comments were on the down side
of the mod. I also forgot if I still could add a CW filter.

Ken
N1KK


With a little research, I created a nice PDF of this modification for the ICOM IC-706MKIIG using the ICOM FL-102 AM FILTER

The modifications are not verified or tested by WorldwideDX.com. Modifications are of your own risk.

Performing modifications of some equipment may be a violation of local laws. If you have any doubts, do not perform the modification.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.