You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

The pictures below are of the boom to mast clamp from my own Hygain LJ-113 10 meter 3 element beam I put up about 6 years ago. This set up lasted less than a week and was replaced with a 1/4" thick 8"x8" Aluminum plate and proper U-Clamps with saddles. No twisting of the boom at the junction of the boom tubing. I also added a 3' aluminum tube inside the 2 sections of original boom tubing. I was very skeptical of the element to boom clamps (also stamped sheet metal) but so far they have held up very well.
[ATTACH=full]48821[/ATTACH]
[ATTACH=full]48822[/ATTACH]
73
David

[QUOTE="Dmans, post: 778422, member: 49046"] The pictures below are of the boom to mast clamp from my own Hygain LJ-113 10 meter 3 element beam I put up about 6 years ago. This set up lasted less than a week and was replaced with a 1/4" thick 8"x8" Aluminum plate and proper U-Clamps with saddles. No twisting of the boom at the junction of the boom tubing. I also added a 3' aluminum tube inside the 2 sections of original boom tubing. I was very skeptical of the element to boom clamps (also stamped sheet metal) but so far they have held up very well. [ATTACH=full]48821[/ATTACH] [ATTACH=full]48822[/ATTACH] 73 David [/QUOTE]

Top Bottom