You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

someone else on another forum mentioned this as well .that the tap could have lost contact .i never checked that !! i should have .not only does the nut get loose maybe that tap does lose connection too .

although i do run quite a bit of rf thru mine it could be heating to the point of melting the solder .then it loses connection .
i never thought to check that .when the next one fails i will do a total tear down and see whats what .

good observations guys.

[QUOTE="fnkycoldmedina, post: 358529, member: 318"] someone else on another forum mentioned this as well .that the tap could have lost contact .i never checked that !! i should have .not only does the nut get loose maybe that tap does lose connection too . although i do run quite a bit of rf thru mine it could be heating to the point of melting the solder .then it loses connection . i never thought to check that .when the next one fails i will do a total tear down and see whats what . good observations guys. [/QUOTE]

Top Bottom