You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I have a pre Bargan 5k with a serial #. I was just doing to spring cleaning and stuff and noticed that the outer shell of mine was loose, so I spun it of and sure enough the nut as well. The locking washer is a elcheapo one so I replaced it with a new stainless one. I just cleaned it up and really torque it down, applied some silicone on it and plan to let it air out for a few days while its apart. If it does it again then its up for exploration as well.

[QUOTE="binrat, post: 362082, member: 8181"] I have a pre Bargan 5k with a serial #. I was just doing to spring cleaning and stuff and noticed that the outer shell of mine was loose, so I spun it of and sure enough the nut as well. The locking washer is a elcheapo one so I replaced it with a new stainless one. I just cleaned it up and really torque it down, applied some silicone on it and plan to let it air out for a few days while its apart. If it does it again then its up for exploration as well. [/QUOTE]

Top Bottom