Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Kenwood MC-85 mic to Cobra 2000gtl

Greg T said:
Looks like #6 Kenwood would go to #3 Cobra.
Click to expand...
This mic has no way to ground the receive line from the Cobra. You'll need to buy the adapter posted above or build something to invert the output of the PTT line.

The signal that would be coming from pin #6 if it was used is receive audio like for a handie-talkie headset. Which is why the MC-85 doesn't use that pin since it doesn't have a speaker or headphone jack.
 
  • Like
Reactions: tecnicoloco

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom