Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Kenwood TM-281A No Audio

K

keystone990

Member
Jan 25, 2012
13
1
13
Indiana, PA
www.indidata.net
OK I just purchased a Kenwood TM-281A and I am having a strange issue.

When I try to connect to a repeater, the radio is not sending any audio. I have the correct tone, etc. Even my club's repeater which does not require a tone is not receiving any audio from me. I use my handheld and it works fine. Here is the twist. On simplex the audio is great. Any ideas from any of the more experienced out there?

Thank you,

Clark
 

Are you sure you're getting in to the repeater? Are you getting a squelch tail?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom