So guys i dug this out today, the radio is cooked but i was thinking i could rig up the rf deck as a stand alone amp. Below i have supplied a few pictures, can anyone tell me what i need to do with these two wires?( in the radio they are the 2 going to the mini coax connections next to each other, and on the rf deck they are terminated the same way) do i feed them voltage? Also what wattage do you feel is safe to send into this deck? the deck is 2 sd1446 and the radio had 1 mitsubishi c2312. I have already figured out the keying wiring, please help me out, this is just going to be a stand alone unit if you folks can help me out. Thanks in advance.
https://www.dropbox.com/s/j70ziuyspbk8dgn/IMG_20170414_180148.jpg?dl=0
https://www.dropbox.com/s/lw5zbojyunm71p5/IMG_20170414_180312.jpg?dl=0
https://www.dropbox.com/s/klbz1zzbq5wvd3n/IMG_20170414_180455.jpg?dl=0
https://www.dropbox.com/s/c6i8udly8mrkdyr/IMG_20170414_180544.jpg?dl=0
https://www.dropbox.com/s/j70ziuyspbk8dgn/IMG_20170414_180148.jpg?dl=0
https://www.dropbox.com/s/lw5zbojyunm71p5/IMG_20170414_180312.jpg?dl=0
https://www.dropbox.com/s/klbz1zzbq5wvd3n/IMG_20170414_180455.jpg?dl=0
https://www.dropbox.com/s/c6i8udly8mrkdyr/IMG_20170414_180544.jpg?dl=0