• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Looking for a Clock Motor for a Dwight D CB Base Station

danmcclain

Sr. Member
I Support WorldwideDX.com!
Dec 11, 2020
1,186
720
123
75
Looking for a clock motor for a Dwight D CB Base Station, doesn't have to be working... Help please... Dan
 

Looking for a clock motor for a Dwight D CB Base Station, doesn't have to be working... Help please... Dan
Seems like facebook is full of scammers trying to sell me a motor thats not even close to the one I want... I'm not an idiot I know what the real motor looks like.
 
Dan,
Try this web site (below). I had a Teaberry Stalker XV with a bad motor. My search was for a Sankyo Intermatic WG6B9A. I am unsure if your radio has the same or similar motor but this guy is the answer if it does. A pic of the back plate from the Teaberry clock motor is attached for reference.

 

Attachments

Dan,
Try this web site (below). I had a Teaberry Stalker XV with a bad motor. My search was for a Sankyo Intermatic WG6B9A. I am unsure if your radio has the same or similar motor but this guy is the answer if it does. A pic of the back plate from the Teaberry clock motor is attached for reference.

Thanks for the info Larry. I found a different way to repair them taking the gears out of a similiar motor. Dan
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.