J
joetoast
Guest
You guys with pickup trucks, specifically Dodge RAMs, where did you mount your antenna?
thanks ....
</p>
thanks ....
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
J
joetoast
Guest
You guys with pickup trucks, specifically Dodge RAMs, where did you mount your antenna?
thanks ....
</p>
thanks ....
R
RollingRadios
Guest
Through the center of the roof.
Wm. Warlock
"Warlock, 71 in Va"
Rollingradios@aol.com
Mail me your XForce questions</p>
Wm. Warlock
"Warlock, 71 in Va"
Rollingradios@aol.com
Mail me your XForce questions</p>
R
RollingRadios
Guest
Through the center of the roof.
Wm. Warlock
"Warlock, 71 in Va"
Rollingradios@aol.com
Mail me your XForce questions</p>
Wm. Warlock
"Warlock, 71 in Va"
Rollingradios@aol.com
Mail me your XForce questions</p>
V
Viking245
Guest
My buddy mounted his on the front driver-side fender (Radio Shack bracket). He also tried the passenger-side front fender, but for some reason the drive-side worked better. Maybe it's a West coast thing.
On his previous truck, he custom made a bracket that mounted on top of the bed rail near the front. Again, driver side. It was basically a piece of flat stock which got the antenna outside of the bed-rail so he could put on the canopy.
I mention his because I drive a yuppie Expedition and you asked about truck installations.
Joe-Viking
yuppie Expedition
Connex 4800DXL
Messenger M4V
102" steel whip
no more, no less
</p>
On his previous truck, he custom made a bracket that mounted on top of the bed rail near the front. Again, driver side. It was basically a piece of flat stock which got the antenna outside of the bed-rail so he could put on the canopy.
I mention his because I drive a yuppie Expedition and you asked about truck installations.
Joe-Viking
yuppie Expedition
Connex 4800DXL
Messenger M4V
102" steel whip
no more, no less
</p>
V
Viking245
Guest
My buddy mounted his on the front driver-side fender (Radio Shack bracket). He also tried the passenger-side front fender, but for some reason the drive-side worked better. Maybe it's a West coast thing.
On his previous truck, he custom made a bracket that mounted on top of the bed rail near the front. Again, driver side. It was basically a piece of flat stock which got the antenna outside of the bed-rail so he could put on the canopy.
I mention his because I drive a yuppie Expedition and you asked about truck installations.
Joe-Viking
yuppie Expedition
Connex 4800DXL
Messenger M4V
102" steel whip
no more, no less
</p>
On his previous truck, he custom made a bracket that mounted on top of the bed rail near the front. Again, driver side. It was basically a piece of flat stock which got the antenna outside of the bed-rail so he could put on the canopy.
I mention his because I drive a yuppie Expedition and you asked about truck installations.
Joe-Viking
yuppie Expedition
Connex 4800DXL
Messenger M4V
102" steel whip
no more, no less
</p>
D
dnk424
Guest
I'm mounting mine directly behind the cab (middle)of the bed rail,the mount is called a boss hawg gripper.(www.tmrce.com) got that site from eduk8ter,nice set up,kinda pricey though.
CDX-424 SUPER MUD DUCK STANDING BY. QUACK,QUACK</p>
CDX-424 SUPER MUD DUCK STANDING BY. QUACK,QUACK</p>
D
dnk424
Guest
I'm mounting mine directly behind the cab (middle)of the bed rail,the mount is called a boss hawg gripper.(www.tmrce.com) got that site from eduk8ter,nice set up,kinda pricey though.
CDX-424 SUPER MUD DUCK STANDING BY. QUACK,QUACK</p>
CDX-424 SUPER MUD DUCK STANDING BY. QUACK,QUACK</p>
J
joetoast
Guest
that mount does look good. I gues I could make a cutout in my bedliner to fit it.
thanks ...
</p>
thanks ...
J
joetoast
Guest
that mount does look good. I gues I could make a cutout in my bedliner to fit it.
thanks ...
</p>
thanks ...
2
2IR473
Guest
I used the Firestik stake hole mount on my Ram.
I worked oversees all the time with that mount and a Wilson 5' Silverload, 2950 and just a bit of heat.
473 IN SE PA
</p>
I worked oversees all the time with that mount and a Wilson 5' Silverload, 2950 and just a bit of heat.
473 IN SE PA
</p>
2
2IR473
Guest
I used the Firestik stake hole mount on my Ram.
I worked oversees all the time with that mount and a Wilson 5' Silverload, 2950 and just a bit of heat.
473 IN SE PA
</p>
I worked oversees all the time with that mount and a Wilson 5' Silverload, 2950 and just a bit of heat.
473 IN SE PA
</p>