• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Looking for Sadelta Bravo no Echo

TonyV225

W9WDX Amateur Radio Club Member
Apr 18, 2005
5,824
331
143
Wisconsin
lm looking for a Sadelta that was made with just the volume no echo in it it is called a Bravo Plus I have one that ive had for years now since mid 1990s its a red base it works but the beep is screwed up if its on the mic keys and I would like to find one simular I run it on my Galaxy 2527 and that radio has the echo already.
 

these guys have one Tony if you haven't already seen it for 20.00 bucks UK ...www.kcb.co.uk/sechand.htm ......You could always just go with the Sadelta/Galaxy echo master pluses and just turn off the echo on those if you wanted to go that route.
 
sad bravo plus

Hi i know this is an oldish post and a bit late but u say the beep does not work if mem serves me right on this model as like most of the sad models at the very front of the mic key below there is a cmos ic 40ll surrounding this is quite a few small value caps in (nano farads) ceramics if you replaced all you wouldn't be looking at much money to do this you must keep to the values of the caps if you deviate-no beep'' worth a play.warhorse.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.