• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

mag.257 mods

  • Thread starter Thread starter jmtnman
  • Start date Start date
J

jmtnman

Guest
257 on the way been looking for the best mods for it ,what ones work best on this radio??..have seen talk of a npc mod what is this one...thanks.. mtnman


</p>
 

257 on the way been looking for the best mods for it ,what ones work best on this radio??..have seen talk of a npc mod what is this one...thanks.. mtnman


</p>
 
About all you can do with this radio is open up the amc and align it and a few other basic adjustments.


</p>
 
About all you can do with this radio is open up the amc and align it and a few other basic adjustments.


</p>
 
For the freq. mod....www.bills2way.com/modification/magnum_257_mod.html


<hr />73, Mike
photo.thumb.jpeg
</p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=kd5vhf>KD5VHF</A> at: 8/22/04 2:10 am
 
There's the standard diode/resistor mod that you can do to just about any radio. It looks great on a watt meter...whether or not you will like the resultant audio is up to you.



Moleculo


</p>
 
There's the standard diode/resistor mod that you can do to just about any radio. It looks great on a watt meter...whether or not you will like the resultant audio is up to you.



Moleculo


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.