• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Magnum s45hp

undertaker

Undertaker
I Support WorldwideDX.com!
Apr 5, 2006
3,191
3,454
273
67
Texas
My magnum is new works fine on am but when on ssb the analog and digital meter do not peg out when I key the mic. doe this need to go back for repair?

Thanks
Bobby
 

There is no carrier on SSB, it's all modulated watts. The meter will not show any output until you speak.
 
s45hp

Is this the omega force that magnum puts out?..if it is go to cbradiomagazine, it shows a lot..
Also open your mic up remove 2 screws, you will see the little circuit board..turn it over and you will see a pot which you can adjust turn it up 3/4 of the way, should work then..
DOCTOR/795
 
with the mic on it's front, back off guts facing you turn the pot all the way to the left then use the mic gain to turn down, my Omega sounds it's best with the mic gain knob on the radio at half way on SSB. Not sure about AM just because I don't talk on AM. What a great radio for SSB. Every time I sell one that I have I miss it in a few days and start looking for another. My fav is the one with the rfx 75 and the white meter background
 

Attachments

  • Magnum omega force 2.jpg
    Magnum omega force 2.jpg
    52.2 KB · Views: 2
Hi there where I can get the operating manual ? I lost mine and I am trying to buy another radio two but it seems nobody have in stock .
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.