You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I got it sorted out Marconi from your data sheet post #6. I have printed everything out and am following you just fine.
Others can post up if they need clarification.

What I am interested in would be the stock 72 inch Imax radials on the Imax (.625wl) at about 27 feet height mast and feed line included in model. We could start horizontal, then 45 degrees then 70 degrees on the radials angle to see if there is any improvement.

Of course the first model at horizontal radials should tell us alot and whether we would even want to do the other iterations.

I am hoping to see a reduction in lobes and more gain on the primary. Ideally for me would be to see only two lobes.

Let me know what you think on this or if I need to clarify anything before you proceed to running any models.

Thanks for your help and time. Good Day.

<blockquote data-quote="gamegetter" data-source="post: 369418" data-attributes="member: 14621">I got it sorted out Marconi from your data sheet post #6.&nbsp; I have printed everything out and am following you just fine.Others can post up if they need clarification.What I am interested in would be the stock 72 inch Imax radials on the Imax (.625wl) at about 27 feet height mast and feed line included in model.&nbsp; We could start horizontal, then 45 degrees then 70 degrees on the radials angle to see if there is any improvement.Of course the first model at horizontal radials should tell us alot and whether we would even want to do the other iterations.I am hoping to see a reduction in lobes and more gain on the primary.&nbsp; Ideally for me would be to see only two lobes.Let me know what you think on this or if I need to clarify anything before you proceed to running any models.Thanks for your help and time.&nbsp; Good Day.</blockquote>

[QUOTE="gamegetter, post: 369418, member: 14621"] I got it sorted out Marconi from your data sheet post #6. I have printed everything out and am following you just fine. Others can post up if they need clarification. What I am interested in would be the stock 72 inch Imax radials on the Imax (.625wl) at about 27 feet height mast and feed line included in model. We could start horizontal, then 45 degrees then 70 degrees on the radials angle to see if there is any improvement. Of course the first model at horizontal radials should tell us alot and whether we would even want to do the other iterations. I am hoping to see a reduction in lobes and more gain on the primary. Ideally for me would be to see only two lobes. Let me know what you think on this or if I need to clarify anything before you proceed to running any models. Thanks for your help and time. Good Day. [/QUOTE]

Top Bottom